When your HVAC system falters, the comfort of your Draper, UT or Riverton, UT home is compromised. First Choice Heating & Air understands the urgency of HVAC issues, yet we also recognize the value in homeowners knowing preliminary checks to ensure a service call is truly necessary. Before reaching out to an HVAC company in Draper, UT consider these troubleshooting steps to potentially save time and expense.
Air Filter Inspection: A Common Culprit for HVAC Issues
A dirty air filter is often the simplest yet most overlooked cause of HVAC problems. Before calling HVAC companies in Riverton, UT, we recommend checking your air filter. A blocked filter can impede airflow, forcing your system to operate less effectively and with greater effort. This lack of efficiency may lead to elevated energy expenses and the potential for expensive maintenance.
- Inspect your air filter each month and follow the manufacturer’s guidelines for replacement, usually every 30 to 90 days.
- Choose the right filter for your needs, considering factors like allergen reduction if you have pets or allergies.
Thermostat Check: Is It Really Your HVAC Acting Up?
Sometimes the issue isn’t with your HVAC system but with its control center: the thermostat. Before contacting an HVAC company in Draper, UT:
- Make sure your thermostat is on the appropriate setting (either heating or cooling) and adjust the temperature to your desired level.
- Check the batteries. Many modern thermostats use batteries, and low power can lead to malfunctions.
- Verify that the thermostat’s program settings are not overriding your manual temperature adjustments.
Circuit Breakers and Power Supply: Ensuring Your System Has Power
One of the first steps you should take when your HVAC system appears non-responsive is to verify the status of your circuit breakers and power supply. This is a crucial step because, without power, your system cannot function. At First Choice Heating & Air, we highlight the critical need to examine your home’s electrical panel for tripped circuit breakers or blown fuses that may be affecting your HVAC system’s performance. Here are the steps you can take to ensure your system has power:
- Locate your home’s electrical panel. It’s usually found in a garage, basement, or utility room.
- Inspect for tripped circuit breakers or blown fuses. Look for switches that have moved to the “off” position or fuses that are visibly damaged.
- Restore any tripped circuit breakers by switching them to the “off” position before flipping them back to “on.” This can restore power to your HVAC system if a temporary overload had caused the breaker to trip.
- Substitute any blown fuses with new ones that match the original amperage, to maintain the electrical safety of your system.
By taking these steps, you ensure that your HVAC system has the necessary power to operate. Often, resetting a tripped circuit breaker or replacing a blown fuse can swiftly restore functionality to your system. However, if these issues persist, it may indicate a more significant problem that requires professional attention. In such cases, or if you’re unsure about handling electrical components, it’s best to contact a professional HVAC service in Riverton, UT, like First Choice Heating & Air, to safely address the issue.
Inspecting Vents and Registers: Blocked Airflow Solutions
Blocked or closed vents and registers can significantly impact your system’s efficiency and comfort levels in your home.
- Conduct a walkthrough of your home to verify that all vents and registers are free from obstruction by furniture, rugs, or drapes and fully open.
- Regular cleaning of vents can prevent dust accumulation that could restrict airflow.
Outdoor Unit Obstructions: Clearing the Way for Your HVAC
Your HVAC system’s outdoor unit needs sufficient airflow to operate properly. Overgrown vegetation or debris around the unit can hinder its performance.
- Maintain at least a 2-foot clearance around the unit, removing leaves, twigs, and other debris that could obstruct airflow.
- Look for any apparent damage or strange sounds that might suggest an issue needing expert intervention.
First Choice Heating & Air is committed to providing top-notch HVAC service in Riverton, UT, and the surrounding areas. We recognize the significance of having an efficiently operating HVAC system for the comfort and safety of your home. By performing these preliminary checks, you might resolve simple issues yourself or better describe the problem to our technicians, ensuring a more efficient service call.
However, if after these checks your system still isn’t performing optimally, don’t hesitate to contact us. Our experienced team is prepared to identify and fix any HVAC problems, guaranteeing your home stays comfortable throughout the year. Trust First Choice Heating & Air, your reliable HVAC company in Draper, UT, for all your heating and cooling needs.
